YASKAWA OYMC V1000

2.9 MEMOBUS/Modbus Data Table
YASKAWA ELECTRIC SIEP C710606 10A YASKAWA AC Drive - V1000 PRELIM. Programming Manual 281
MEMOBUS/Modbus Communications
2
00B0H Option Code
Register contains ASCII code of 3rd and 4th digit of the option card type
number. Example: Register value is 5343H for “P3” if a SI-P3 option card
is installed.
00B5H
Frequency Reference
After Soft-starter
r/min units
<4>
00B6H 0.01% units
00B7H
Frequency Reference
r/min <4>
00B8H 0.01% units
00BFH oPE Error Number
00C0H
Fault contents 3
bit 0 Reserved
bit 1 Undervoltage (Uv1)
bit 2 Control Power Supply Undervoltage (Uv2)
bit 3 Soft Charge Circuit Fault (Uv3)
bit 4 Reserved
bit 5 Ground Fault (GF)
bit 6 Overcurrent (oC)
bit 7 Overvoltage (ov)
bit 8 Heatsink Overheat (oH)
bit 9 Heatsink Overheat (oH1)
bit A Motor Overload (oL1)
bit B Drive Overload (oL2)
bit C Overtorque Detection 1 (oL3)
bit D Overtorque Detection 2 (oL4)
bit E Dynamic Braking Transistor Fault (rr)
bit F Braking Resistor Overheat (rH)
00C1H
Fault contents 4
bit 0 External Fault at input terminal S3 (EF3)
bit 1 External Fault at input terminal S4 (EF4)
bit 2 External Fault at input terminal S5 (EF5)
bit 3 External Fault at input terminal S6 (EF6)
bit 4 Reserved
bit 5 Overspeed (oS)
bit 6 Excessive Speed Deviation (dEv)
bit 7 PG Disconnected (PGo)
bit 8 Input Phase Loss (PF)
bit 9 Output Phase Loss (LF)
bit A Motor Overheat (PTC input) (oH3)
bit B Digital Operator Connection Fault (oPr)
bit C EEPROM Write Error (Err)
bit D Motor Overheat Fault (PTC input) (oH4)
Register No. Contents