2.10 Enter Command
290 YASKAWA ELECTRIC SIEP C710606 10A YASKAWA AC Drive - V1000 PRELIM. Programming Manual
Upper/lower limit
check
Upper/lower limit check is performed
taking the settings of related
parameters into account.
The upper/lower limit of the changed
parameter is checked only.
Default value of
related parameters
Not affected. The settings of related
parameters remain unchanged. They
must be changed manually if needed.
The default settings of related
parameters are changed
automatically.
Error handling when
setting multiple
parameters
Data is accepted even if one setting is
invalid. The invalid setting will be
discarded. No error message occurs.
Error occurs if only one setting is
invalid. All data sent are discarded.
H5-11 Settings H5-11 = 0 H5-11 = 1
To Next Page
Loading...
