YASKAWA OYMC V1000

A.2 Parameter Table
374 YASKAWA ELECTRIC SIEP C710606 10A YASKAWA AC Drive - V1000 PRELIM. Programming Manual
U8: Custom Monitors for FBD’s
U8 parameters are reserved for FBD’s
U8-01 – Reserved for FBD’s, Monitor 1. –
0.01
%
Α A Α 1950
U8-02 – Reserved for FBD’s, Monitor 2. –
0.01
%
AAA 1951
U8-03 – Reserved for FBD’s, Monitor 3. –
0.01
%
AAA 1952
U8-04 – Reserved for FBD’s, Monitor 4. –
0.01
%
AAA 1953
U8-05 – Reserved for FBD’s, Monitor 5. –
0.01
%
AAA 1954
U8-06 – Reserved for FBD’s, Monitor 6. –
0.01
%
AAA 1955
U8-07 – Reserved for FBD’s, Monitor 7. –
0.01
%
AAA 1956
U8-08 – Reserved for FBD’s, Monitor 8. –
0.01
%
AAA 1957
U8-09 – Reserved for FBD’s, Monitor 9. –
0.01
%
AAA 1958
U8-10 – Reserved for FBD’s, Monitor 10. –
0.01
%
AAA 1959
<27> Setting units for this parameter are determined by o2-04, Drive Model Selection. Less than 11 kW: 2 decimal
points, 11 kW and above: 1 decimal point.
<59> Available in drive software 1011 and later.
<62> Valid from drive software version 1011. Max value is 65536 in older software.
No. Name Description
Analog
Output Level
Unit
Control
Mode
Addr.
Hex
V/f
O
LV
P
M