Yealink SIP-T38G

Administrator’s Guide for SIP-T3xG IP Phones
100
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Account
-Adv.htm&acc=<x>
For T38G, x ranges from 0 to 5.
For T32G, x ranges from 0 to 2.
Phone User Interface
Assign a direct pickup key.
To configure a direct pickup key via web user interface:
1. Click on DSS Key->Memory Key (or Line Key).
2. In the desired DSS key field, select Direct Pickup from the pull-down list of Type.
3. Enter the direct call pickup code followed by the specific extension in the Value
field.
4. Select the desired line from the pull-down list of Account.
5. Click Confirm to accept the change.
To configure the direct call pickup feature on a phone basis via web user interface:
1. Click on Phone->Features->Call Pickup.
2. Select the desired value from the pull-down list of Direct Call Pickup.