Yealink SIP-T38G

Configuring Basic Features
119
Accept Intercom
Accept Intercom allows the IP phone to automatically answer an incoming intercom call.
Intercom Mute
Intercom Mute allows the IP phone to mute the microphone for incoming intercom calls.
Warning Tone
Warning Tone allows the IP phone to play a warning tone before answering an intercom
call.
Intercom Barge
Intercom Barge allows the IP phone to automatically answer an incoming intercom call
while there is already an active call on the IP phone. The active call is put on hold.
Procedure
Incoming intercom calls can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the incoming intercom
call feature.
For more information, refer to
Incoming Intercom calls on page
272.
Local
Web User Interface
Configure the incoming intercom
call feature.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
cgiServer.exx?page=Phone-Feat
ures.htm
Phone User Interface
Configure the incoming intercom
call feature.
To configure intercom via web user interface:
1. Click on Phone->Features->Intercom Settings.