Yealink SIP-T38G

Administrator’s Guide for SIP-T3xG IP Phones
74
Procedure
Call completion can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the call completion
feature.
For more information, refer to Call
Completion on page 252.
Local
Web User Interface
Configure the call completion
feature.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
cgiServer.exx?page=Phone-Feat
ures.htm
Phone User Interface
Configure the call completion
feature.
To configure call completion via web user interface:
1. Click on Phone->Features->General Information.
2. Select the desired value from the pull-down list of Call Completion.
3. Click Confirm to accept the change.
To configure call completion via phone user interface:
1. Press Menu->Features->Call Completion.