Yealink SIP-T38G

Configuring Basic Features
71
Procedure
Auto redial can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the auto redial feature.
For more information, refer to
Auto Redial on page 251.
Local
Web User Interface
Configure the auto redial feature.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
cgiServer.exx?page=Phone-Feat
ures.htm
Phone User Interface
Configure the auto redial feature.
To configure auto redial via web user interface:
1. Click on Phone->Features->General Information.
2. Select the desired value from the pull-down list of Auto Redial.
3. (If enabled) Enter the desired time interval in the Auto Redial Interval (seconds)
field.
The default time interval is 10s.
4. (If enabled) Enter the desired times in the Auto Redial Times field.
The default times are 10.
5. Click Confirm to accept the change.