Administrator’s Guide for SIP-T3xG IP Phones
108
2. In the desired DSS key field, select Call Return from the pull-down list of Type.
3. Click Confirm to accept the change.
To configure a call return key via phone user interface:
1. Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select Call Return from the Key Type
field.
5. Press the Save soft key to accept the change.
Call park allows a user to park a call at a special extension and then retrieve it on any
other phone in the system. The user can park a call at an extension, known as call park
orbit, by pressing a call park key. The current call is put on hold and can be retrieved on
another IP phone. This feature depends on support from a SIP server.
Procedure
Call park key can be configured using the configuration files or locally.
Assign a call park key.
For more information, refer to
Call Park Key on page 325.
Assign a call park key.
Navigate to:
To Next Page
Loading...
