Yealink SIP-T38G

Configuring Basic Features
107
4. Select the desired value from the pull-list of Dialog-Info Call Pickup.
5. Click Confirm to accept the change.
Call return, also known as last call return, provides convenience for a user to place a
call back to the caller of the last incoming call. The IP phones implement call return using
a call return key.
Procedure
Call return key can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Assign a call return key.
For more information, refer to Call
Return Key on page 325.
Local
Web User Interface
Assign a call return key.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
cgiServer.exx?page=Dsskey.htm
Phone User Interface
Assign a call return key.
To configure a call return key via web user interface:
1. Click on DSS Key->Memory Key (or Line Key).