Configuring Basic Features
103
Procedure
Group pickup can be configured using the configuration files or locally.
Configure the group pickup
code on a per-account basis.
For more information, refer to
Group Pickup on page 266.
Assign a group pickup key.
For more information, refer to
Group Pickup Key on page 324.
Configure the group pickup
feature on a phone basis.
For more information, refer to
Group Pickup on page 265.
Assign a group pickup key.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Dsskey.
htm
Configure the group pickup
feature on a phone basis.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Phone-F
eatures.htm
Configure the group pickup
code on a per-account basis.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Account
-Adv.htm&acc=<x>
For T38G, x ranges from 0 to 5.
For T32G, x ranges from 0 to 2.
Assign a group pickup key.
To configure a group pickup key via web user interface:
1. Click on DSS Key->Memory Key (or Line Key).
2. In the desired DSS key field, select Group Pickup from the pull-down list of Type.
3. Enter the group call pickup code in the Value field.