Yealink SIP-T38G Administrator's Guide

Administrator’s Guide for SIP-T3xG IP Phones
134
3. Press or , or the Switch soft key to select BLF from the Type field.
4. Press or , or the Switch soft key to select the desired line from the Account
ID field.
5. Enter the phone number or extension you want to monitor in the Value field.
6. (Optional.) Enter the pickup code in the Extension field.
7. Press the Save soft key to accept the change.
The BLF list feature is used to monitor a list of specific users for status changes on the IP
phone. This feature enables the supervisor’s phone to subscribe to a list of users, and
receive notifications of the status of the monitored users. You need to specify the BLF list
URI on the supervisor’s phone to monitor the list of users. The BLF list URI is configurable
on a per-account basis. The BLF list keys on the IP phone can present the status of the list
of users.
When the monitored user is idle, the user presses the BLF list key to dial out the phone
number. When the monitored user receives an incoming call, the user presses the BLF list
key to pick up the call directly.
Procedure
BLF list can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the BLF list URI and
BLF list pickup code.
For more information, refer to
BLF List on page 284.
y0000000000xx.cfg
Assign a BLF list key.
For more information, refer to
BLF List Key on page 329.
Local
Web User Interface
Configure the BLF list URI and
BLF list pickup code.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Account
-Adv.htm&acc=<x>
For T38G, x ranges from 0 to 5.
For T32G, x ranges from 0 to 2.
Assign BLF list keys.
Navigate to:
http://<phoneIPAddress>/cgi-bi

Yealink SIP-T38G Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	48
Touchscreen	-
Display resolution	480 x 272 pixels
Display number of colors	16.78 million colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g