Yealink SIP-T38G

Getting Started
21
PPPoE (Point-to-Point Protocol over Ethernet) is a network protocol that is used by Internet
Service Providers (ISPs) to provision Digital Subscriber Line (DSL) high speed Internet
services. PPPoE allows an office or building-full of users to share a common DSL
connection to the Internet. The Internet port on the IP phone can be configured as a
PPPoE port to connect to the Internet. Contact your ISP for the PPPoE username and
password.
Procedure
PPPoE can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure PPPoE on the IP phone.
For more information, refer to
PPPoE on page 227.
Local
Web User Interface
Configure PPPoE on the IP phone.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
cgiServer.exx?page=Network-B
asic.htm
Phone User Interface
Configure PPPoE on the IP phone.
To configure PPPoE via web user interface:
1. Click on Network->Basic.
2. In the Internet Port field, mark the PPPoE radio box.