Yealink SIP-T38G

Administrator’s Guide for SIP-T3xG IP Phones
106
The example of the dialog-info message carried in NOTIFY message for reference:
<?xml version="1.0"?>
<dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="6" state="full"
entity="sip:1013@10.2.1.199">
<dialog id="706655206@10.2.8.213" call-id="706655206@10.2.8.213" local-tag="827932784"
remote-tag="1887460740" direction="recipient">
<state>early</state>
<local>
<identity>sip:1013@10.2.1.199</identity>
<target uri="sip:1013@10.2.1.199">
</target>
</local>
<remote>
<identity>sip:1011@10.2.1.199</identity>
<target uri="sip:1011@10.2.8.213:5063">
</target>
</remote>
</dialog>
</dialog-info>
Procedure
Dialog-Info Call Pickup can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the Dialog-Info Call
Pickup feature on the IP phone.
For more information, refer to
Dialog-Info Call Pickup on page
267.
Local
Web User Interface
Configure the Dialog-Info Call
Pickup feature on the IP phone.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Account
-Adv.htm&acc=<x>
For T38G, x ranges from 0 to 5.
For T32G, x ranges from 0 to 2.
To configure Dialog-Info Call Pickup via web user interface:
1. Click on Account->Basic.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.