Yealink SIP-T38G

Administrator’s Guide for SIP-T3xG IP Phones
72
To configure auto redial via phone user interface:
1. Press Menu->Features->Auto Redial.
2. Press or , or the Switch soft key to select the desired value from the Auto
Redial field.
3. Enter the desired time in the Auto Redial Interval field.
4. Enter the desired times in the Auto redial times field.
5. Press the Save soft key to accept the change.
Auto answer allows the IP phone to automatically answer an incoming call. The IP
phone cannot automatically answer the incoming call during a call even if auto answer
is enabled. Auto answer is configurable on a per-account basis.
Procedure
Auto answer can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the auto answer
feature.
For more information, refer to
Auto Answer on page 252.
Local
Web User Interface
Configure the auto answer
feature.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
cgiServer.exx?page=Account.ht
m&acc=<x>
For T38G, x ranges from 0 to 5.
For T32G, x ranges from 0 to 2.
Phone User Interface
Configure the auto answer
feature.
To configure auto answer via web user interface:
1. Click on Account->Basic.
2. Select the desired account from the pull-down list of Account.