Yealink SIP-T38G

Administrator’s Guide for SIP-T3xG IP Phones
84
Procedure
Return code when refusing a call can be configured using the configuration files or
locally.
Configuration File
<y0000000000xx>.cfg
Configure the return code when
refusing a call.
For more information, refer to
Return Code When Refuse on
page 257.
Local
Web User Interface
Configure the return code when
refusing a call.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
cgiServer.exx?page=Phone-Feat
ures.htm
To configure the return code when refusing a call via web user interface:
1. Click on Phone->Features->General Information.
2. Select the desired value from the pull-down list of Return Code When Refuse.
3. Click Confirm to accept the change.