Yealink SIP-T38G

Configuring Basic Features
83
For more information, refer to
Busy Tone Delay on page 257.
Local
Web User Interface
Configure the busy tone delay
feature.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
cgiServer.exx?page=Phone-Feat
ures.htm
To configure busy tone delay via web user interface:
1． Click on Phone->Features->General Information.
2． Select the desired value from the pull-down list of Busy Tone Timer (seconds).
3． Click Confirm to accept the change.
Return Code When Refuse defines the return code and reason of the SIP response
message when refusing an incoming call. The caller’s phone LCD screen displays the
reason according to the return code received. The following types of return code and
reason are available:
 404 (Not found)
 480 (Temporarily not available)
 486 (Busy here)