Yealink SIP-T38G

Administrator’s Guide for SIP-T3xG IP Phones
240
―local_time.manual_time_enable‖ is set to 1
(NTP Server).
Format
IP Address or Domain Name
Default Value
cn.pool.ntp.org
Range
Not Applicable
Example
local_time.ntp_server2 = 192.168.0.5
Parameter-
local_time.interval
Configuration File
<y0000000000xx>.cfg
Description
Sets the IP phone to update time and date
from the NTP server at regular intervals (in
seconds).
Note: It works only if the parameter
―local_time.manual_time_enable‖ is set to 1
(NTP Server).
Format
Integer
Default Value
1000
Range
Not Applicable
Example
local_time.interval = 1200
Time Zone
Parameter-
local_time.time_zone
Configuration File
<y0000000000xx>.cfg
Description
Defines the time zone.
For more available time zone list, refer to
Appendix B: Time Zones on page 221.
Format
Not Applicable
Default Value
+8
Range
-11 to +13
Example
local_time.time_zone = +9
Parameter-
local_time.time_zone_name
Configuration File
<y0000000000xx>.cfg
Description
Defines the desired time zone name.