Yealink SIP-T38G

Appendix
239
NTP Server
Parameter-
local_time.manual_time_enable
Configuration File
<y0000000000xx>.cfg
Description
Configures the phone to obtain the time and
date manually or dynamically from the NTP
server.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Manual
1-NTP Server
Example
local_time.manual_time_enable = 1
Parameter-
local_time.ntp_server1
Configuration File
<y0000000000xx>.cfg
Description
Sets the IP address or the domain name of the
primary NTP server.
Note: It works only if the parameter
―local_time.manual_time_enable‖ is set to 1
(NTP Server).
Format
IP Address or Domain Name
Default Value
cn.pool.ntp.org
Range
Not Applicable
Example
local_time.ntp_server1 = 192.168.0.5
Parameter-
local_time.ntp_server2
Configuration File
<y0000000000xx>.cfg
Description
Sets the IP address or the domain name of the
secondary NTP server. If the primary NTP
server is not configured or cannot be
accessed, the IP phone will request the time
and date from the secondary NTP server.
Note: It works only if the parameter