Yealink SIP-T38G

Administrator’s Guide for SIP-T3xG IP Phones
238
Example
phone_setting.lock = 2
Parameter-
phone_setting.phone_lock.unlo
ck_pin
Configuration File
<y0000000000xx>.cfg
Description
Sets a new unlock password. Once the IP
phone is locked, you can use ―123‖ as the
default password to unlock it.
Note: The IP phones support numeric
characters only in password.
Format
Numeric characters only
Default Value
123
Range
0 to 32768
Example
phone_setting.phone_lock.unlock_pin =
123456
Parameter-
phone_setting.phone_lock.lock
_time_out
Configuration File
<y0000000000xx>.cfg
Description
Configure the IP phone to automatically lock
the keypad after a delay time (in seconds).
If set to 0 (0s), the keypad will not be locked
automatically. In this case, you can long press
the pound key to lock the keypad only.
Note: This parameter works only if the IP
phone lock type is preset.
Format
Integer
Default Value
10
Range
0 to 3600s
Example
phone_setting.phone_lock.lock_time_out = 8