Yealink SIP-T38G

Appendix
237
Parameter-
security.user_password
Configuration File
<y0000000000xx>.cfg
Description
Sets a new administrator password for the IP
phone. The IP phone uses ―admin‖ as the
default administrator password.
Note: The IP phones support ASCII characters
32-126(0x20-0x7E) only in passwords.
Format
administrator username:new password
Default Value
admin
Range
ASCII characters 32-126(0x20-0x7E)
Example
security.user_password = admin:password000
Parameter-
phone_setting.lock
Configuration File
<y0000000000xx>.cfg
Description
Specifies the type of phone lock.
Menu Key: The Menu soft key is locked.
Function Key: MESSAGE, RD, CONF, HOLD,
MUTE, TRAN, OK, X, navigation keys, soft keys,
line keys and memory keys are locked (For
T32G, CONF, HOLD, MUTE and memory keys
do not exist).
All Keys: All keys are locked.
Answer call only: All keys are locked.
If set to 0 (Disabled), the IP phone lock feature
is disabled.
Format
Integer
Default Value
0
Range
Valid values are:
0-Disabled
1-Menu Key
2-Function Keys
3-All Keys
4-Answer call only