Yealink SIP-T38G

Configuring Basic Features
77
6. Press the Save soft key to accept the change.
The anonymous call rejection feature allows the IP phone to automatically reject
incoming calls from callers who deliberately block their identities from showing up. The
anonymous caller’s phone LCD screen presents ―Anonymity Disallowed‖.
The anonymous call rejection on code or anonymous call rejection off code configured
on the IP phone is used to inform the server of activating or deactivating the anonymous
call rejection feature. The anonymous call rejection on code and anonymous call
rejection off code may vary on different servers.
Procedure
Anonymous call rejection can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the anonymous call
rejection feature.
For more information, refer to
Anonymous Call Rejection on
page 254.
Local
Web User Interface
Configure the anonymous call
rejection feature.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
cgiServer.exx?page=Account.ht
m&acc=<x>
For T38G, x ranges from 0 to 5.
For T32G, x ranges from 0 to 2.
Phone User Interface
Configure the anonymous call
rejection feature.
To configure anonymous call rejection via web user interface:
1. Click on Account->Basic.
2. Select the desired account from the pull-down list of Account.
3. Select the desired value from the pull-down list of Anonymous Call Rejection.
4. (Optional.) Enter the anonymous call rejection on code in the On Code field.