Yealink SIP-T38G

Configuring Basic Features
105
3. Click on Advanced.
4. Enter the group call pickup code in the Group Call Pickup Code field.
5. Click Confirm to accept the change.
To configure a group pickup key via phone user interface:
1. Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select Group Pickup from the Key Type
field.
5. Press or , or the Switch soft key to select the desired line from the Account
ID field.
6. Enter the group call pickup code in the Value field.
7. Press the Save soft key to accept the change.
On some specific servers, call pickup is implemented through SIP signals. The IP phones
support to pick up incoming calls via a NOTIFY message with dialog-info event. A user
can pick up an incoming call by pressing a DSS key used to monitor a specific extension
(such as a BLF key).