Yealink SIP-T38G

Configuring Basic Features
109
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Dsskey.
htm
Phone User Interface
Assign a call park key.
To configure a call park key via web user interface:
1. Click on DSS Key->Memory Key (or Line Key).
2. In the desired DSS key field, select Call Park from the pull-down list of Type.
3. Enter the desired value (e.g., call park feature code) in the Value field.
4. Select the desired line from the pull-down list of Account.
5. Click Confirm to accept the change.
To configure a call park key via phone user interface:
1. Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select Call Park from the Key Type field.
5. Press or , or the Switch soft key to select the desired line from the Account
ID field.
6. Enter the desired value (e.g., call park feature code) in the Value field.
7. Press the Save soft key to accept the change.
The web server type feature determines access permission of the IP phone’s web user