Yealink SIP-T38G

Administrator’s Guide for SIP-T3xG IP Phones
250
Parameter-
call_waiting.enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the call waiting feature.
If set to 0 (Disabled), a new incoming call is
automatically rejected by the IP phone with a
busy message while during a call.
If set to 1 (Enabled), the phone LCD screen
presents a new incoming call while during a
call.
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled
Example
call_waiting.enable = 1
Parameter-
call_waiting.tone
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the playing of a call
waiting tone when the IP phone receives an
incoming call during a call.
If set to 1 (Enabled), the IP phone performs an
audible indicator when receiving a new
incoming call during a call.
Note: It works only if the parameter
―call_waiting.enable‖ is set to 1 (Enabled).
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled
Example
call_waiting.tone = 1