Administrator’s Guide for SIP-T3xG IP Phones
70
2. Select the desired value from the pull-down list of Call Waiting Tone.
3. Click Confirm to accept the change.
To configure call waiting and call waiting tone via phone user interface:
1. Press Menu->Features->Call Waiting.
2. Press or , or the Switch soft key to select the desired value from the Call
Waiting field.
3. Press or , or the Switch soft key to select the desired value from the Call
Waiting Tone field.
4. Press the Save soft key to accept the change.
Auto redial allows the IP phone to redial a busy number after the first attempt. Both the
number of attempts and delay between redials are configurable.
To Next Page
Loading...
