Yealink SIP-T38G

Configuring Basic Features
115
DTMF on page 270.
Local
Web User Interface
Configure the method of
transmitting DTMF digits and
the payload type.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Account
-Adv.htm&acc=<x>
For T38G, x ranges from 0 to 5.
For T32G, x ranges from 0 to 2.
Configure the number of times
for the IP phone to send the end
RTP Event packet.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Phone-F
eatures.htm
To configure the method of transmitting DTMF digits via web user interface:
1. Click on Account->Basic.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Select the desired value from the pull-down list of DTMF Type.
5. (If SIP INFO or AUTO+SIP INFO is selected.) Select the desired value from the
pull-down list of How to INFO DTMF.