Yealink SIP-T38G

Administrator’s Guide for SIP-T3xG IP Phones
122
Alert-Info: http://127.0.0.1/Bellcore-dr 3
Alert-Info: <http:// 192.168.0.12:8080/ring.wav >;info= Family ;x-line-id=0
 If the ―Alter-Info‖ header contains the keywords ―Bellcore-drN‖ or ―MyMelodyN‖,
the IP phone will map the index ―N‖ to the relevant ring tone.
Value of N
Ring Tone
1
Ring1.wav
2
Ring2.wav
3
Ring3.wav
4
Ring4.wav
5
Ring5.wav
6
Ring6.wav
7
Ring7.wav
8
Ring8.wav
 If the ―Alert-Info‖ header contains a remote URL, the IP phone will try to download
and play the ring tone from the URL. If failing to download, the IP phone will match
the keyword (e.g., Family ) with the internal ringer text configured on the IP phone,
and then play the specified ring tone. If there is no text matched, the IP phone will
play the ring tone configured on the IP phone in about ten seconds.
Procedure
Distinctive ring tones can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the distinctive ring
tones feature.
For more information, refer to
Distinctive Ring Tones on page
274.
<y0000000000xx>.cfg
Configure the internal ringer
text and internal ringer file.
For more information, refer to
Distinctive Ring Tones on page
274.
Local
Web User Interface
Configure the internal ringer
text and internal ringer file.