EasyManuals Logo

Yealink SIP-T38G Administrator's Guide

Yealink SIP-T38G
402 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #165 background imageLoading...
Page #165 background image
Administrator’s Guide for SIP-T3xG IP Phones
152
phone will perform the specified action and respond with a 200 OK message. The HTTP
GET request may contain variable named as ―key‖ and variable value, which are
separated by ―=‖. The URI format is: http://IP address of phone/cgi-bin/
cgiServer.exx?key= variable value (e.g.
http://192.168.1.5/cgi-bin/cgiServer.exx?key=MUTE). Entering the URI in the web
browser triggers the IP phone to perform the predefined action (e.g. mute the call).
The following table lists the variable values may be used when specifying a URI:
Variable
Phone Action
key=OK/key=ENTER
Press the OK key or the Enter soft key.
key=SPEAKER
Press the Speaker key.
key=F_TRANSFER
Press the Transfer key.
key=VOLUME_UP
Increase the volume.
key=VOLUME_DOWN
Decrease the volume.
key=MUTE
Mute the call.
key=F_HOLD
Press the Hold key.
key=X
Press the X key.
key=0-9/*/POUND
Send the DTMF digit (0-9, * or #).
key=L1-L6
Press the Line key.
key=D1-D10
Press the DSS key.
key=F_CONFERENCE
Press the Conference key.
key=F1-F4
Press the Soft key.
key=MSG
Press the MESSAGE key.
key=HEADSET
Press the HEADSET key.
key=RD
Press the Redial key.
key=UP/DOWN/LEFT/RIGHT
Press the Navigation keys.
key=Reboot
Reboot the IP phone.
key=AutoP
Let the IP phone do auto provisioning.
key=DNDOn
Activate the DND mode.
key=DNDOff
Deactivate the DND mode.
Note
For security reasons, the IP phone does not receive and handle the HTTP GET request by
default. You need to specify the trusted IP address for Action URI. When receiving the
The variable does not work with all events. For example, the variable ―key=MUTE‖ is
only applicable when the IP phone is during a call.

Table of Contents

Other manuals for Yealink SIP-T38G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T38G and is the answer not in the manual?

Yealink SIP-T38G Specifications

General IconGeneral
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Keypad number of keys48
Touchscreen-
Display resolution480 x 272 pixels
Display number of colors16.78 million colors
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Voice codecsG.711, G.722, G.723.1, G.726
BluetoothNo
Security algorithms802.1x RADIUS, HTTPS, SSL/TLS
AC adapter input voltage100 - 240 V
AC adapter output voltage5 V
Power consumption (typical)4.6 W
Operating relative humidity (H-H)10 - 95 %
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Compliance industry standardsIEEE 802.3af
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth204 mm
Width273 mm
Height42 mm
Weight1050 g

Related product manuals