Yealink SIP-T38G

Configuring Advanced Features
159
TLV Type
TLV Name
Description
LLDP-MED Capabilities, Network Policy,
Extended Power via MDI-PD, Inventory.
Network Policy
Port VLAN ID, application type, L2 priority
and DSCP value.
Extended
Power-via-MDI
Power type, source, priority and value.
Inventory –
Hardware Revision
Hardware revision of phone.
Inventory –
Firmware Revision
Firmware revision of phone.
Inventory –
Software Revision
Software revision of phone.
Inventory – Serial
Number
Serial number of phone.
Inventory –
Manufacturer Name
Manufacturer name of phone.
The default value is ―yealink‖.
Inventory – Model
Name
Model name of phone.
Asset ID
Assertion identifier of phone.
The default value is ―asset‖.
Procedure
LLDP can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the LLDP feature.
For more information, refer to
LLDP on page 292.
Local
Web User Interface
Configure the LLDP feature.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Networ
k-Adv.htm
To configure LLDP via web user interface:
1. Click on Network->Advanced.
2. In the LLDP field, select the desired value from the pull-down list of Active.
3. Enter the desired time interval (in seconds) in the Packet Interval field.