EasyManua.ls Logo

Yealink SIP-T38G

Yealink SIP-T38G
402 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring Advanced Features
171
Local
Web User Interface
Configure the 802.1X
authentication on the IP phone.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Networ
k-Adv.htm
Phone User Interface
Configure the 802.1X
authentication on the IP phone.
To configure the 802.1X via web user interface:
1. Click on Network->Advanced.
2. Select the desired value from the pull-down list of 802.1x Mode.
3. Enter the username for authentication in the Identity field.
4. Enter the password for authentication in the MD5 Password field.
5. Click Confirm to accept the change.
The web user interface pops up a dialog box to prompt that the settings will take
effect after reboot.
6. Click OK to reboot the IP phone.
To configure the 802.1X via phone user interface:
1. Press Menu->Settings->Advanced Settings (password: admin)
->Network->802.1x.

Table of Contents

Other manuals for Yealink SIP-T38G

Related product manuals