Yealink SIP-T38G

Administrator’s Guide for SIP-T3xG IP Phones
228
effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
network.pppoe.user = xmyealink
Parameter-
network.pppoe.password
Configuration File
<y0000000000xx>.cfg
Description
Configures the PPPoE password when the
Internet port type is configured as PPPoE.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
network.pppoe.password = yealink123
Parameter-
network.bridge_mode
Configuration File
<y0000000000xx>.cfg
Description
Configures the PC port mode.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Router
1-Bridge
Example
network.bridge_mode = 1