EasyManua.ls Logo

Yealink SIP-T38G

Yealink SIP-T38G
402 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrators Guide for SIP-T3xG IP Phones
230
0-Disabled
1-Enabled
Example
network.pc_port.dhcp_server = 1
Parameter-
network.dhcp.start_ip
Configuration File
<y0000000000xx>.cfg
Description
Configure the start IP address that the IP
phone assigns for the PC attached to the PC
port when the PC port is configured as Router.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
IP Address
Default Value
10.0.0.10
Range
Not Applicable
Example
network.dhcp.start_ip = 10.0.0.10
Parameter-
network.dhcp.end_ip
Configuration File
<y0000000000xx>.cfg
Description
Configure the end IP address that the IP phone
assigns for the PC attached to the PC port
when the PC port is configured as Router.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
IP Address
Default Value
10.0.0.100
Range
Not Applicable
Example
network.dhcp.end_ip = 10.0.0.100

Table of Contents

Other manuals for Yealink SIP-T38G

Related product manuals