Yealink SIP-T38G - Page 285

Administrator’s Guide for SIP-T3xG IP Phones
272
Example
features.dtmf.repetition = 2
Parameter-
features.intercom.allow
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to
automatically answer an incoming intercom
call.
If set to 0 (Disabled), the IP phone rejects
incoming intercom calls and sends a busy
signal to the caller.
If set to 1 (Enabled), the IP phone
automatically answers an incoming intercom
call.
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled
Example
features.intercom.allow = 1
Parameter-
features.intercom.mute
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to mute the
microphone when answering an intercom
call.
If set to 0 (Disabled), the microphone is
un-muted for incoming calls.
If set to 1 (Enabled), the microphone is
muted for intercom calls.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
features.intercom.mute = 1