Yealink SIP-T38G

Administrator’s Guide for SIP-T3xG IP Phones
292
handles HTTP GET requests from any IP
address.
Format
IP Address
Default Value
Blank
Range
IP address or any
Example
features.action_uri_limit_ip = any
Parameter-
account.x.transport
Configuration File
<MAC>.cfg
Description
Configures the transport type for account X.
If set to 3 (DNS SRV), the IP phone is able to
perform DNS SRV query, and fail over the
request to the secondary server when
there is no response from the primary
server.
X ranges from 1 to 6.
Format
Integer
Default Value
0 (UDP)
Range
Valid values are:
0-UDP
1-TCP
2-TLS
3-DNS SRV
Example
account.1.transport = 3
Parameter-
network.lldp.enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the LLDP feature on the
IP phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.