Yealink SIP-T38G - Page 322

Appendix
309
Range
Valid values are:
0-Disabled
1-Enabled
Example
auto_provision.mode = 1
Parameter-
auto_provision.repeat.enable
Configuration File
<y000000000068>.cfg
Description
Enable or disable the IP phone to check the
new configuration repeatedly.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
auto_provision.repeat.enable = 1
Parameter-
auto_provision.repeat.minutes
Configuration File
<y000000000068>.cfg
Description
Configure the interval (in minutes) the
phone repeatedly checks the new
configuration files.
Note: It works only if the parameter
―auto_provision.repeat.enable‖ is set to 1
(Enabled).
Format
Integer
Default Value
1440
Range
1 to 43200
Example
auto_provision.repeat.enable = 1
Parameter-
auto_provision.weekly.enable
Configuration File
<y000000000068>.cfg
Description
Enable or disable the phone to check the
new configuration files weekly.
Format
Boolean
Default Value
0