Yealink SIP-T38G

Appendix
327
Parameter-
memorykey.x.line
Configuration File
<y0000000000xx>.cfg
Description
Specifies the desired line to apply the
intercom key.
X ranges from 1 to 10.
Format
Integer
Range
Valid values are:
0 to 6 (for T38G)
0 to 3 (for T32G)
Example
memorykey.2.line = 1
Parameter-
memorykey.x.value
Configuration File
<y0000000000xx>.cfg
Description
Specifies the intercom number.
X ranges from 1 to 10.
Format
String
Range
Not Applicable
Example
memorykey.2.value = 1008
LDAP Key
Parameter-
memorykey.x.type
Configuration File
<y0000000000xx>.cfg
Description
Configures a memory key to be LDAP key
on the IP phone.
The digit 38 stands for the key type LDAP.
X ranges from 1 to 10.
Format
Integer
Value
38
Example
memorykey.2.type = 38