Yealink SIP-T38G

Configuring Basic Features
45
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Phone-F
eatures.htm
Assign a keypad lock key.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Dsskey.
htm
Phone User Interface
Configure the type of phone
lock.
Assign a keypad lock key.
To configure phone lock via web user interface:
1. Click on Phone->Features->Phone Lock.
2. Select the desired type from the pull-down list of Keypad Lock.
3. Enter the unlock password (numeric characters) in the Phone Unlock PIN (0~15
digital) field.
4. Enter the desired time in the Auto Lock Time-out (0~3600s) field.
5. Click Confirm to accept the change.
To configure a keypad lock key via web user interface:
1. Click on DSS Key->Memory Key (or Line Key).