Yealink SIP-T38G

Administrator’s Guide for SIP-T3xG IP Phones
66
cgiServer.exx?page=Contacts.ht
m
Phone User Interface
Add the contact to the local
directory directly.
To add the contact to the local directory via web user interface:
1. Click on Contacts->Contacts->Contacts.
2. Enter the name and the office, mobile or other numbers in the corresponding fields.
3. Select the desired account from the pull-down list of Account.
4. Select the desired ring tone from the pull-down list of Ring.
5. Select the desired group from the pull-down list of Group.
6. Select the desired photo from the pull-down list of Photo.
7. Click Add to add the contact.
8. Click Save to accept the change.
To add the contact to the local directory via phone user interface:
1. Press Directory->Local Directory.
2. Select the desired contact group (For example, select Contacts).
3. Press the Add soft key.
4. Enter the name and the office, mobile or other numbers in the corresponding fields.
5. Press or , or the Switch soft key to select the desired account from the
Account field. If Auto is selected, the IP phone will use the first available account
when placing calls to the contact from the local directory.