Configuring Advanced Features
233
The supported and enabled phone
capabilities.
The Telephone capability is supported and
enabled by default.
Description of port that sends data unit.
The default value is “WAN PORT”.
IEEE Std 802.3
Organizationally
Specific TLV
MAC/PHY
Configuration/Status
Duplex mode and network speed settings of
the Skype for Business phone.
The Auto Negotiation is supported and
enabled by default.
The advertised capabilities of PMD.
Auto-Negotiation is:
100BASE-TX (full duplex mode)
100BASE-TX (half duplex mode)
10BASE-T (full duplex mode)
10BASE-T (half duplex mode)
TIA
Organizationally
Specific TLVs
The MED device type of the Skype for
Business phone and the supported
LLDP-MED TLV type can be encapsulated in
LLDPDU.
The supported LLDP-MED TLV types are:
LLDP-MED Capabilities, Network Policy,
Extended Power via MDI-PD, Inventory.
Port VLAN ID, application type, L2 priority
and DSCP value.
Power type, source, priority and value.
Inventory – Hardware
Revision
Hardware revision of the Skype for Business
phone.
Inventory – Firmware
Revision
Firmware revision of the Skype for Business
phone.
Inventory – Software
Revision
Software revision of the Skype for Business
phone.
Inventory – Serial
Number
Serial number of the Skype for Business
phone.
Manufacturer name of the Skype for Business