Yealink T46G

Yealink Skype for Business HD IP Phones Administrator Guide
234
TLV Type
TLV Name
Description
Manufacturer Name
phone.
The default value is “IP_Phone”.
Inventory – Model
Name
Model name of the Skype for Business phone.
The default value is “T46”.
Asset ID
Assertion identifier of the Skype for Business
phone.
Procedure
LLDP can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure LLDP.
Parameters:
network.lldp.enable
network.lldp.packet_interval
Local
Web User Interface
Configure LLDP.
Navigate to:
http://<phoneIPAddress>/servlet?
p=network-adv&q=load
Phone User Interface
Configure LLDP feature.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.lldp.enable
0 or 1
1
Description:
Enables or disables the LLDP (Linker Layer Discovery Protocol) feature on the Skype for
Business phone.
0-Disabled
1-Enabled
Note: If you change this parameter, the Skype for Business phone will reboot to make the
change take effect.
Web User Interface:
Network->Advanced->LLDP->Active
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->LLDP->LLDP Status