YOKOGAWA EML500 Series User Manual

6-11
IM80B80T10E 21th Edition : Jul.1,2007-00
< 6.INSTALLATION >
Note that the operations at a to i are for obtaining data on the rst trip out (1ST).
At f, press the
F 1
key (START) when the rst
trip out starts. The display then changes to that
marked g. Next, press the
F 1
key (STOP)
when the trip out is nished. This allows the display
to change to that marked h. Here, the log speed (L)
and real speed (R) that have just been obtained
are displayed.
If the
ENT
key is pressed at h, the display marked
i appears. This display asks whether the obtained
data on the trip out are to be cancelled or not. To
cancel them and restart the trip out, press the
F 1
key (YES) . The display then returns to f.
To validate the obtained data and proceed to the
trip back (2ND), press the
F 2
key (NO) while
the display is at i. This allows the display to ad-
vance to j (the operations for the trip back start from
here).
The operations and display at j to m are the same
as those for the trip out (f to i).
If the
F 2
key is pressed while the display is at
m (after the completion of the trip back), the display
changes to that marked n as shown on the follow-
ing page.
F 1 F 2
DISPL
PREV
MODE
F 1 F 2
DISPL
PREV
MODE
MAINT
MAINT
F 1 F 2
DISPL
PREV
MODE
MAINT
g.
f.
h.
i.
F 1 F 2
DISPL
PREV
MODE
MAINT
ENT
F 1 F 2
DISPL
PREV MODE
F 1 F 2
DISPL
PREV MODE
MAINT
MAINT
F 1 F 2
DISPL
PREV
MODE
MAINT
k.
j.
l.
m.
F 1 F 2
DISPL
PREV
MODE
MAINT
ENT
To a
From e,s,or t
To n.
F 1 F 2
DISPL
PREV
MODE
F 1 F 2
DISPL
PREV
MODE
MAINT
MAINT
F 1 F 2
DISPL
PREV
MODE
MAINT
g.
f.
h.
i.
F 1 F 2
DISPL
PREV
MODE
MAINT
ENT
F 1 F 2
DISPL
PREV MODE
F 1 F 2
DISPL
PREV MODE
MAINT
MAINT
F 1 F 2
DISPL
PREV
MODE
MAINT
k.
j.
l.
m.
F 1 F 2
DISPL
PREV
MODE
MAINT
ENT
To a
From e,s,or t
To n.

YOKOGAWA EML500 Series Specifications

General

Brand	YOKOGAWA
Model	EML500 Series
Category	Measuring Instruments
Language	English