YOKOGAWA EML500 Series User Manual

A-10
IM80B80T10E 21th Edition : Jul.1,2007-00
< Appendix >
2/2
Intermediate error compensation factor :  C1  C2
Alarm speed setting:  HI  LO kt
GPS format setting
· Header (up to 6 characters) :
· Speed data position (number of commas) :
· Checksum data :  Used  Not used
· Terminator :  LF  C0h
· Baud rate :  9600  4800  2400
· Stop bits:  1  1.5  2
· Parity :  Odd  Even  None
Character length :  7  8
Analog voltage (current ) ouput range:  0V to 5V (0mA to 20mA)  1V to 5V (4mA to 20mA)
Zero adjustment value : kt
Sensitivity adjustment value : %
Span setting : LSP times , TSP times (transverse direction for dual-axis log)
Response speed setting:
Linearizer table data
0 C1 C2
5 kt. kt.
10
15
20
25
30
35
40
45
50
55
60
65
This is to certicate that the installation and adjustments have been compleated as shown above.
Date
(Signed by captain);
(Signed by dockyard foreman);

YOKOGAWA EML500 Series Specifications

General

Brand	YOKOGAWA
Model	EML500 Series
Category	Measuring Instruments
Language	English