<1. Operation>
1-2
IM 12A01G01-03EN 1st Edition :Mar. 25, 2021-00
n Getting started
Before starting measurement, check initial parameters, device selection and conrm they comply
with the specication you choose. For further information on setting parameters or others,
go to Chapter 4 and Chapter 5. We recommend that you follow the next order to be ready for
measurement.
1. Select Language if necessary Section 1.1
2. Setting Date/Time if necessary* Section 1.2
* Factory default at delivery is set on Singapore Standard Time. If you use the converter in other country, set it to the local time.
3 Setting converter Chapter 4
4 Setting password if necessary Section 1.3
To Next Page
Loading...
Need help?
General
