2-6
<Toc> < 2. Initial Settings >
IM 05D01C02-41E 3rd Edition: May 31, 2006-00
NOTE
The controller may automatically initialize the registered operating parameter setpoints if
any change is made to the data item PV Input Type (IN1), Maximum Value of PV Input
Range (RH1), Minimum Value of PV Input Range (RL1), PV Input Decimal Point Position
(DP1), Maximum Value of PV Input Scale (SH1) or Minimum Value of PV Input Scale
(SL1). After a change has been made to any of these data items, be sure to verify the
registered operating parameter setpoints to ensure that they are correct. If any data item
has been changed to its default, set it to a required value.
How to return to a menu
Simultaneously press both the and keys once during parameter setting. This lets
you return to the parameter menu.
To Next Page
Loading...
Need help?
General
