10
IM 01B08B02-01EN
10
YS1500/YS1700 Operating Procedure
When using the instrument for the first time, proceed according to the following sequence:
Will you create
user programs?
Create
user programs
YSS1000
Setting Software (PC)
YS1500
YS1700
Unpack the instrument and check the specifications
Installation
Yes
Turn ON power supply
Set up engineering constants
Select the
programmable mode
Write user programs
Start tuning/operation
Regular operation
YS1700
No
Select the
multi-function mode
► Setting the Controller Mode (p.36)
► YSS1000 Setting Software/YS1700 Programmable
Function User’s Manual
► Operating the Engineering
Displays (from p.36)
► Operating the Tuning Displays
(from p.32)
Tuning Guide (from p.40)
► Monitoring and Control of Regular Operations (from p.16)
► Installation and Wiring (p.42)
► Seting the Controller Mode (p.36)
► YSS1000 Setting
Software/YS1700
Programmable
Function User’s
Manual
► Checking the Contents of the Package (p.5)
► YSS1000 Setting
Software/YS1700
Programmable Function
User’s Manual
set using the YSS1000
Setting Software.
Turn ON power supply
Multi-function mode has
the following three modes:
• Single-loop mode
• Cascade mode
• Selector mode
Figure 3.1
To Next Page
Loading...
Need help?
General
