31
5.1.1 Enzyme Membrane Integrity Test
Use YSI 2363 Potassium Ferrocyanide (FCN) Standard to determine if your enzyme membranes are structurally intact.
1. Pour small amount of FCN standard (1000 mg/dL) in a test tube or multi-well plate
2. Press the Run icon to process it as a sample.
3. From the Run Batch tab, touch [New]
4. Choose from the selection of supported racks and plates.
5. We highly recommend renaming the rack/plate “Daily Checks” by touching its ID to indicate that it contains your
daily check batches.
6. After selecting your plate/rack, touch the [Edit] button
7. Touch the location of each sample for the first batch. Selected locations will be blue.
To Next Page
Loading...
