YSI 2900 - Start; Status; Run Stat

39
Figure 5.4
5.3.3 Start
Touch to run the current batches.
The 2900 Series will calibrate as required and run the batches.
5.3.4 Status
1. Touch the Status tab.
2. Then select a module to view its status.
3. The virtual printer window displays details of previous samples and calibrations.
4. Use the arrow buttons to scroll the printer window.
Run Stat 5.4
A Stat sample at Station 2 runs without stopping a plate analysis or monitor session that is in progress.
NOTE: The Sipper is not designed to pierce septa.
Select module
to view status
Virtual Printer