6
2900 Series General Specifications 1.4
Sample size ................................................. Adjustable from 10 to 50 microliters (aspirated volume), per module
Response time ............................................ Enzyme Sensors
• Sample results in 60 seconds (average) for one module
• 100 seconds for 2 modules
• 135 seconds for 3 modules
• Complete sample-to-sample cycle in less than 3 minutes
(May vary with analyte and sample matrix.)
Ion Selective Electrodes (ISE)
• Sample results in 150 seconds (average) for 2 modules
• 195 seconds for 3 modules
• Complete sample-to-sample cycle in less than 5 minutes
(May vary with analyte and sample matrix)
Output signals:
Serial .......................................................... USB and RS232
Power requirement ............................... 100–240 VAC ±10%
50–60 Hz ±5%
42 Watts nominal
Working environment:
Ambient temperature ................................ 15–35°C
Relative humidity ...................................... 10–75% (non-condensing)
Regulatory compliance .................................. ETL, CE, RoHS
61010-1 compliance:
• Pollution degree 2
• Installation category 2
• Altitude 2000m
• Atmosphere 75 KPa to 106 KPa
• Indoor use only
Instrument dimensions ................................ 14.0" wide x 20.5" deep x 15.75" high
35.6 cm x 52.1 cm x 40.0 cm
Instrument weight ........................................ 39 pounds
17.7 kilograms
2960 Online Monitor Specifications 1.5
1.5.1 Monitor
Size:
Monitor Cup ............................................... 0.75 x 0.75 x 0.88 inches
Pump Head ................................................ 2.0 x 2.2 x 0.85 inches
Sample Inlet Tubing ...................................... Silicone, 0.08 OD x 0.02 ID (inches)
Volume ....................................................... 5.1 microliters/inch
Inlet Channel Pump Tubing ........................... PharMed
, 0.13 OD x 0.035 ID (inches)
To Next Page
