42
Results 5.5
1. Touch the Results tab.
2. Then select a sample position to display the results.
3. Select a chemistry to display details.
6. Online Monitor and Control
The YSI 2960 Online Monitor and Control System allows “on-line” monitoring and control of sterile systems over long
periods of time without contamination. It also provides an alternative means of interfacing the 2900 Series with external
measurement/control systems.
The 2960 may draw sample from a process stream, bioreactor or other suitable source and deliver sample to the
analyzer. The system can operate unattended for days or weeks, provided sufficient reagent supply is considered.
The sample volume required for each analysis varies somewhat depending on the distance, flow rate and fluid interface
used, however, typically 1.5 milliliters is sufficient to purge the 2960 sample cup and deliver fresh sample.
The 2960 preserves sterility by filling the end of the sampling line with an antiseptic after every sample.
sample
details
To Next Page
Loading...
