Zebra 105SL Plus User Manual

173
Index
7/3/13 P1056468-002
E
early warning
maintenance
how to enable or disable, 89
printhead life menu item, 23
reset new printhead counter, 24
reset printhead cleaning counter, 23
set printhead cleaning interval, 23
user menu item, 23
media and ribbon
how to enable or disable, 89
user menu item, 23
electrical specifications, 162
environmental specifications, 162
error messages, 139
ESSID
user menu item, 34
ways to view, 99
Ethernet
characteristics of a wired connection, 41
characteristics of wireless connection, 42
exterior cleaning, 125
F
factory defaults
reload parameters, 19
restore network settings, 19
fanfold media
described, 48
loading, 61
FCC compliance, 4
features, 160
feed a label
how to set as head-close action, 92
how to set as power-up action, 92
FEED button
FEED and PAUSE self test, 154
FEED self test, 151
location, 16
flash memory initialization
how to start, 91
user menu item, 26
fonts
fonts label, 91
user menu item, 25
format convert
how to use, 94
user menu item, 31
format prefix
user menu item, 29
ways to set format command prefix, 101
formats
formats label, 91
user menu item, 25
G
gap/notch
illustrations, 47
selecting media type, 85
sensor selection through user menu, 22
setting media type through user menu, 22
ways to select media sensor type, 102
gateway
user menu item, 34
ways to view or set, 98
H
head test count
how to enable or disable, 87
user menu item, 30
head-close action
how to change, 92
user menu item, 30
host handshake
user menu item, 28
ways to set, 105
I
idle display
described, 17
how to change what displays, 95
user menu item, 32
images
images label, 91
user menu item, 25
images distorted on labels, 145
indicator lights
combined with error message on ZT230, 139
initialize flash memory
how to start, 91
user menu item, 26
initiate manual calibration, 94
inspect for shipping damage, 38
IP address
user menu item, 33
ways to view or set, 97
IP protocol
how to change, 97
user menu item, 33
IP protocol (IP resolution)
how to change, 97
user menu item, 33

Zebra 105SL Plus Specifications

General

Weight	50 lbs / 22.7 kg
Humidity	20-85% non-condensing
Print Method	Thermal Transfer
Resolution	203 dpi (8 dots/mm)
Max Print Width	4.09 inches / 104 mm
Max Print Speed	12 inches per second / 305 mm per second
Memory	16 MB SDRAM, 8 MB Flash
Media Width	0.79 inches / 20 mm to 4.5 inches / 114 mm
Media Thickness	0.003 inches / 0.076 mm to 0.012 inches / 0.305 mm
Media Types	Continuous, die-cut, black mark
Ribbon Width	2.00 inches / 51 mm to 4.33 inches / 110 mm
Ribbon Length	1476'/450 m
Connectivity	Parallel, Serial
Optional Connectivity	Ethernet, Wireless
Power Requirements	90-264 VAC; 48-62 Hz
Operating Temperature	40°F to 105°F / 5°C to 40°C
Storage Temperature	-40°F to 140°F / -40°C to 60°C